Marine-Icom® IHAZ1

Description and application

Instrumentation and control marine cable for installation inside and on the deck of ships, shielded, armoured and with SHF1 type sheath. Electromagnetic interference (EMI) protection.

Markets

Boats & Ships
Location

Indoors/Outdoors
Type of installation

Fixed

Design

Single shield

Aluminium/polyester tape applied on each pair, with 100% coverage + tinned copper drain wire
Overall cable shield

Copper braid

Conductor

Polished copper, flexible Class 5 according to EN 60228 and IEC 60228
Insulation

XLPE
Identification

Multicore conductor with numbered black, back pairs and numbered white
Sheath

SHF1 type polyolefin
Colour

Orange (or grey, black)

Technical characteristics

Service temperature in fixed and protected installation

-40 °C to +90 °C
Service voltage

150/250 V (300 V)

Temperature during handling, transport and storage

+5 °C to +50 °C
Max. conductor temperature

+90 °C
Max. temperature in short circuit (max. 5 sec)

+250 °C
Test voltage

1.500 V
Minimum bend radius in fixed installation

8 x outer diameter

Other properties

Standards of reference

IEC 60092-350, IEC 60092-351, IEC 60092-359, IEC 600292-376
Certification

ABS, Buerau Veritas, DNV-GL, Lloyd´s Register
Water resistance

AD7 Partial immersion (possibility of total or partial coverage by water partially and intermittently.)
UV resistance

Excellent
Chemical resistance in general

Please refer to technical appendix
RoHS

Free of harmful substances according to RoHS II - Directive 2011/65/EU and Delegated Directive (EU) 2015/863 amending Annex II of Directive 2011/65/EU

Fire resistant properties

Halogen-free

IEC 60754-1

Flame retardant

IEC 60332-1-2
Fire retardant

IEC 60332-3-22
Low smoke opacity

IEC 61034-2
Low gas corrosivity

IEC 60754-2

Other colours and configurations possible on request. Sumcab Specialcable Group S.L. (Sumcab) reserves the right to make changes to the product described in this specification without prior notice.While Sumcab makes every reasonable effort to ensure the accuracy of the data at the time of this publication, the information and specifications described in this document are subject to errors or omissions. Sumcab assumes no responsibility that may arise from the use of this specification. Drawings are not to scale unless otherwise specified and are provided for general and informational purposes only. All values represented in this specification should be used only as a guide.

Do you need some help?