Description and application

Multi-pair cable for fixed installation, with double shield, polyethylene insulation and PVC sheath, armoured with steel wire core for ATEX Area. For RS485 / RS232 communication Electromagnetic interference (EMI) protection.

Design

  • Overall cable shield
    100% coverage aluminium/polyester tape + tinned copper braid, 80% minimum coverage
  • Armouring
    Galvanized steel wire core
  • Conductor
    Bare copper, flexible multi-stranded
  • Insulation
    Special polyethylene
  • Identification
    Colours according to DIN 47100 (pairs) (see table in the technical annex)
  • Grip
    PVC
  • Grip colour
    Black
  • Sheath
    Special PVC
  • Colour
    Black

Technical characteristics

  • Service temperature in fixed and protected installation
    -30 °C to +70 °C
  • Service voltage
    100 V (peaks)
  • Temperature during handling, transport and storage
    +5 °C to +50 °C
  • Test voltage
    1.000 V AC
  • Impedance
    (> 1 MHz) 100 ± 15 Ohm
  • Capacity
    45 nF/km
  • Minimum bend radius in fixed installation
    15 x outer diameter

Other properties

  • Standards of reference
    According to VDE 0812
  • Water resistance
    AD5 Jets (possibility of water jets from any direction)
  • Impact resistance
    AG4 Very strong (reinforced for severe industrial use)
  • Resistance to hydrocarbons
    ICEA S-73-532 (4h, 70 ºC)
  • UV resistance
    UL 1581 Section 1200
  • Chemical resistance in general
    Please refer to technical appendix
  • RoHS
    Free of harmful substances according to RoHS II - Directive 2011/65/EU and Delegated Directive (EU) 2015/863 amending Annex II of Directive 2011/65/EU

Fire resistant properties

  • Euroclase CPR
    Eca
  • Fire requirements
    EN 50575
  • Flame retardant
    EN 60332-1-2, IEC 60332-1-2, VDE 0482-332-1-2, NFC 32070 C2

Other colours and configurations possible on request. Sumcab Specialcable Group S.L. (Sumcab) reserves the right to make changes to the product described in this specification without prior notice.While Sumcab makes every reasonable effort to ensure the accuracy of the data at the time of this publication, the information and specifications described in this document are subject to errors or omissions. Sumcab assumes no responsibility that may arise from the use of this specification. Drawings are not to scale unless otherwise specified and are provided for general and informational purposes only. All values represented in this specification should be used only as a guide.

Do you need some help?

Get in touch and we will get back to you as quickly as possible. 

 

+34 93 381 78 76