Description and application
Highly flexible cable for the connection of mobile equipment and machines subjected to very high mechanical loads in dry and humid areas, outdoors and in areas with danger of explosion, especially in mining and industry, quarries and construction sites. According to standard UL & CSA
-
Markets
-
LocationIndoors/Outdoors
-
Type of installationFlexible
Design
- ConductorTinned copper, flexible ASTM B 172 and ICEA S-75-381
- InsulationPhases
- IdentificationBlack, white, red + one yellow grounding conductor + two grounding conductors with green tape
- ProtectionNylon braid
- SheathCPE
- ColourBlack
Technical characteristics
-
Service temperature in fixed and protected installation-40 °C to +90 °C
-
Service voltage2kV
- Service temperature in flexible installation-40 °C to +90 °C
- Temperature during handling, transport and storage+5 °C to +50 °C
- Max. conductor temperature90°C
- Max. temperature in short circuit (max. 5 sec)250°C
- Test voltage6.000V
- Minimum bend radius in fixed installation5 x outer diameter
- Minimum bend radius in flexible installation8 x outer diameter
Other properties
- Standards of referenceICEA S-75-381 / NEMA WC58, ICEA S95-658 / NEMA WC70, ASTM B 172, ASTM B 33
- Water resistanceAD7 Partial immersion (possibility of total or partial coverage by water partially and intermittently.)
- Impact resistanceAG4 Very strong (reinforced for severe industrial use)
- Chemical resistance in generalPlease refer to technical appendix
- RoHSFree of harmful substances according to RoHS II - Directive 2011/65/EU and Delegated Directive (EU) 2015/863 amending Annex II of Directive 2011/65/EU
Fire resistant properties
- Flame retardantUL FT-1
Other colours and configurations possible on request. Sumcab Specialcable Group S.L. (Sumcab) reserves the right to make changes to the product described in this specification without prior notice.While Sumcab makes every reasonable effort to ensure the accuracy of the data at the time of this publication, the information and specifications described in this document are subject to errors or omissions. Sumcab assumes no responsibility that may arise from the use of this specification. Drawings are not to scale unless otherwise specified and are provided for general and informational purposes only. All values represented in this specification should be used only as a guide.
Do you need some help?
Get in touch and we will get back to you as quickly as possible.
+34 93 381 78 76