Description and application
Single pair cable for industrial Ethernet communication type R for installation in industrial robot, halogen-free. Electromagnetic interference (EMI) protection.
-
LocationIndoors/Outdoors
-
Type of installationIndustrial Robotics (Twisting + Bending)
Design
-
Overall cable shield100% coverage aluminium/polyester tape + tinned copper braid, 85% minimum coverage
- ConductorFine copper threads
- InsulationSpecial thermoplastic polymer
- IdentificationBlue, white
- SheathLow adhesion TPU (PUR)
- ColourGreen
Technical characteristics
-
Service temperature in fixed and protected installation-40 °C to +80 °C
-
Service voltage100 V (peaks)
- Service temperature in flexible installation-15 °C to +80 °C
- Service temperature in mobile installation-5 °C to +70 °C
- Temperature during handling, transport and storage+5 °C to +50 °C
- Test voltage1.000 V AC
- Impedance(100 MHz) 100 ± 5 Ohm
- Capacity(800 Hz) ≈ 49 nF/km
- Minimum bend radius in fixed installation5 x outer diameter
- Minimum bend radius in flexible installation5 x outer diameter
- Minimum bend radius for mobile installation (free movement)5 x outer diameter
- Minimum bend radius for twist and bending installation (robotics) (Ambient temperature+10 °C to +60 °C)
- Number of cycles (Ambient temperature+10 °C to +50 °C)
- Max. permissible twist at 1 m± 180 ° (Consult for a higher degrees of twist)
Other properties
- Water resistanceAD5 Jets (possibility of water jets from any direction)
- Oil resistanceUL 758 15.1, EN 50363-10-2, VDE 282 Part 10
- Chemical resistance in generalPlease refer to technical appendix
- RoHSFree of harmful substances according to RoHS II - Directive 2011/65/EU and Delegated Directive (EU) 2015/863 amending Annex II of Directive 2011/65/EU
- Paint-wetting impairment substances (PWIS)The materials used are free of silicone, cadmium and free of substances that prevent paint from gripping on surfaces
Fire resistant properties
-
Halogen-freeEN 60754-1, IEC 60754-1, VDE 0482-754-1
- Flame retardantUL FT-2
Other colours and configurations possible on request. Sumcab Specialcable Group S.L. (Sumcab) reserves the right to make changes to the product described in this specification without prior notice.While Sumcab makes every reasonable effort to ensure the accuracy of the data at the time of this publication, the information and specifications described in this document are subject to errors or omissions. Sumcab assumes no responsibility that may arise from the use of this specification. Drawings are not to scale unless otherwise specified and are provided for general and informational purposes only. All values represented in this specification should be used only as a guide.
Do you need some help?
Get in touch and we will get back to you as quickly as possible.
+34 93 381 78 76