Description and application

Flexible cable with copper braid shield, halogen free insulation and sheath. For the transmission of signals between electrical equipment. Electromagnetic interference (EMI) protection.

Design

  • Overall cable shield
    Tinned copper braid, minimum coverage of 80%
  • Conductor
    Bare copper, flexible multi-stranded
  • Insulation
    Polyolefin
  • Wiring
    Two conductors form a twisted pair with optimum pitch to minimise potential external interference that can disrupt the signal. Pairs wired together concentrically.
  • Identification
    Colours according to DIN 47100 (see table in the technical annex)
  • Sheath
    Polyolefin
  • Colour
    Light grey

Technical characteristics

  • Service temperature in fixed and protected installation
    -15 °C to +70 °C
  • Service voltage
    250 V
  • Temperature during handling, transport and storage
    +5 °C to +50 °C
  • Test voltage
    1.000 V AC
  • Minimum bend radius in fixed installation
    7.5 x outer diameter

Other properties

  • Standards of reference
    According to VDE 0812
  • Water resistance
    AD3 aerosols (possibility of water falling as a spray at an angle of up to 60°)
  • Impact resistance
    AG2 Medium (industrial use)
  • Chemical resistance in general
    Please refer to technical appendix
  • RoHS
    Free of harmful substances according to RoHS II - Directive 2011/65/EU and Delegated Directive (EU) 2015/863 amending Annex II of Directive 2011/65/EU
  • Paint-wetting impairment substances (PWIS)
    The materials used are free of silicone, cadmium and free of substances that prevent paint from gripping on surfaces

Fire resistant properties

  • Euroclase CPR
    Dca-s2,d2,a2
  • Halogen-free
    EN 60754-1, IEC 60754-1, VDE 0482-754-1
  • Fire requirements
    EN 50575
  • Flame retardant
    EN 60332-1-2, IEC 60332-1-2, VDE 0482-332-1-2, NFC 32070 C2
  • Low smoke opacity
    EN 61034-2 , IEC 61034-2, VDE 0482-1034-2
  • Low gas corrosivity
    EN 60754-2, IEC 60754-2, VDE 0482-754-2

Other colours and configurations possible on request. Sumcab Specialcable Group S.L. (Sumcab) reserves the right to make changes to the product described in this specification without prior notice.While Sumcab makes every reasonable effort to ensure the accuracy of the data at the time of this publication, the information and specifications described in this document are subject to errors or omissions. Sumcab assumes no responsibility that may arise from the use of this specification. Drawings are not to scale unless otherwise specified and are provided for general and informational purposes only. All values represented in this specification should be used only as a guide.

Do you need some help?

Get in touch and we will get back to you as quickly as possible. 

 

+34 93 381 78 76