Description and application

Flexible cable for power, output and control with metal armour, 90 ºC XLPE insulation and PVC sheath. Ideally suited in fixed installations that may be subject to possible mechanical aggressions, tensile stresses and in locations with explosive atmospheres (ATEX)

Design

  • Armouring
    Galvanised steel wire core (or aluminium in case of single-conductor cable)
  • Conductor
    Bare copper wires, flexible, Class 5 to IEC 60228
  • Insulation
    XLPE
  • Identification
    ≤ 5 conductors
  • Grip
    PVC
  • Grip colour
    Black
  • Sheath
    Special PVC
  • Colour
    Black

Technical characteristics

  • Service temperature in fixed and protected installation
    -40 °C to +70 °C
  • Service voltage
    0.6/1kV
  • Temperature during handling, transport and storage
    +5 °C to +50 °C
  • Max. conductor temperature
    +90 °C
  • Max. temperature in short circuit (max. 5 sec)
    +250 °C
  • Test voltage
    3.500 V AC
  • Minimum bend radius in fixed installation
    10 x outer diameter

Other properties

  • Standards of reference
    UNE 21123-2 / IEC 60502-1
  • Water resistance
    AD7 Partial immersion (possibility of total or partial coverage by water partially and intermittently.)
  • Impact resistance
    AG4 Very strong (reinforced for severe industrial use)
  • Oil resistance
    UIC 895OR
  • Resistance to hydrocarbons
    UIC 895OR
  • UV resistance
    Good (possibility of sheath discolouration over long time)
  • Chemical resistance in general
    Please refer to technical appendix
  • RoHS
    Free of harmful substances according to RoHS II - Directive 2011/65/EU and Delegated Directive (EU) 2015/863 amending Annex II of Directive 2011/65/EU

Fire resistant properties

  • Euroclase CPR
    Eca
  • Fire requirements
    EN 50575
  • Flame retardant
    EN 60332-1-2, IEC 60332-1-2, VDE 0482-332-1-2, NFC 32070 C2
  • Fire retardant
    EN 60332-3-24, IEC 60332-3-24, VDE 0482-332-3-24
  • Low in halogens
    IEC 60754-1 HCl<15%

Other colours and configurations possible on request. Sumcab Specialcable Group S.L. (Sumcab) reserves the right to make changes to the product described in this specification without prior notice.While Sumcab makes every reasonable effort to ensure the accuracy of the data at the time of this publication, the information and specifications described in this document are subject to errors or omissions. Sumcab assumes no responsibility that may arise from the use of this specification. Drawings are not to scale unless otherwise specified and are provided for general and informational purposes only. All values represented in this specification should be used only as a guide.

Do you need some help?

Get in touch and we will get back to you as quickly as possible. 

 

+34 93 381 78 76